Rechargeable SUP pump with built-in battery

Super smart and strong rechargeable pump, which fits perfectly with your SUP board or other inflatable products. Forget about long cables, heavy rechargeable batteries or sockets that must be within easy reach. Here you have a portable pump that inflates your SUP board in a short time. (Approx.10 min) The pump has 3 presets for different pressures 12PSI, 16PSI and 20PSI, but can also be set to the exact desired PSI between 1-20. Carrying case included. The pump couldn't be easier to use!

Connect the air hose, hold the power button for about 2 seconds and select the desired pressure with the + and - keys. Hold down the + or - key to get to the menu for optional PSI pressure. Press the power button again, and the pump starts to inflate your product to the desired pressure. Sit down and wait, or perform other practical tasks, while you wait for your SUP board to be ready for paddling.

5 different nozzles for different valves are included.

The pump has a built-in Lithium battery of 7500mAh.

Allow the battery 5-6 charges, and use, before it reaches its maximum effect. Also remember to charge the battery every 3 months, if there are periods when the pump is unused. (Winter season) If used correctly, the warranty on the battery is 2 years.

A fully charged pump is enough to inflate 1-2 paddle boards. When using a 12v cable, you will have unlimited battery capacity. ATTENTION! However, only use the pump for 15 minutes at a time. Let it rest/cool down between each round.

The pump is available in blue or white. Choose your favourite. This SUP pump has been a bestseller for the 2022 and 2023 season.

Contents of the package:

Technical info:

• Model No: TSP-2020A
• Max pressure (3 settings): 12PSI/16PSI/20PSI
• Adjustable Pressure: 1-20 PSI
• Airflow: 70L/min
• Pressure gauge: +-0.5PSI
• Battery type: 12V, rechargeable.
• Power type: Li-polymer LiPo
• Battery capacity: 2500mAh*3
• Power supply: Built-in battery, 12v cable connected to the car/boat's 12v plug.
• Charger included: Yes, 220V.
• Cylinder type: 35mm
• Loudness: <85dB
• Working temperature: -20C - +60c
• Weight: 1.5 kg
• Outer packaging dimensions: 54.5cm x39cm x 35cm
• Pump dimensions: 25x17.5x15.5cm
• Length of air hose: 118cm.
• CE approved product.

Instructions for use:

1. Connect the correct valve adapter to the air hose.
2. Connect the air hose to the pump and the SUP board.
3. Press the Power button and hold it down for 2-3 seconds so that the display lights up in blue.
4. Adjust to the desired pressure with the buttons "+" / "-" You can choose between 3 different settings 12PSI, 16PSI or 20PSI.
5. Press the Power button to start the pump.
6. When the product is inflated to the set pressure, the pump switches off automatically.
7. Disconnect the air hose from the SUP board and pack the pump into the storage bag.

Warning:

Do not use the pump for more than 15 minutes at a time. Let it rest/cool down between each round.